Australia & NZ Motocross parts at the Best Prices. Australia & NZ's MX Store with Low Shipping Rates

Bike parts &
Accessory finder

Find all the parts that fit your bike

4-Stroke Engine Oil 10W60 1 Litre - BO Motor Oil

Part No: BO52191
18.26 14.60 USD

This item is currently out of stock

Notify me when this is back in stock:

Recommend for Husqvarna, KTM, TM 4-Strokes

10W60 Oil 1 Litre of 100% Fully Synthetic Racing 4-Lube - from BO Motor Oil of Holland Europe. BO Motor-Oil's Racing 4-Lube has been specially developed for modern hi-performance 4-stroke motorbike engines. Racing 4-Lube uses the very latest in 4-stroke oil technology with its revolutionary "pure bike" ESTER TECH additive system which ensures exceptional film strength and load-carrying properties are reached -  and maintained - in even the most extreme racing conditions.

Racing 4-Lube has been proven though testing in the toughest, most arduous racing conditons from motocross to desert racing to provide complete engine, gearbox & clutch protection. Racing 4-Lube exceeds all the leading 4-stroke manufacturers’ specifications and has passed all manufacturer's testing with ease.

BO Motor-Oil has been manufacturing their highest quality- hi-performance oil in Holland Europe for more than 25 years; they also rebrand and supply their oil to other well know names in the sport. 

Please Note: We are unable to ship this item outside New Zealand

View -Technical Info for Q&A About Oil - What Oil Should I Use?  Oil Specifications. Things you may need to know about oil. Are you paying too much for some brands of motorbike oil? What oil should I be using?

Exceeds all current manufacturers specifications for the engine, gearbox & clutch for: 4-Stroke makes/models off-road & road: Husqvarna and TM 4-Strokes also KTM, Honda, Kawasaki, Suzuki, Yamaha.

  • 1 Litre of 100% Fully Synthetic Racing 4-Lube 10W/60
  • One oil specially developed to protect all of the engine's internals - engine, clutch and gearbox - Recommend for Husqvarna, KTM and TM 4-Strokes - 10W60 is recommend for the KTM/Husqvarna engines with plain bearing conrod/crankshaft - This is the latest engines with forced oil lubrication with 2 Eaton pumps - models all SXF/XCF 2013+,  models all EXCF 2014+
  • Made in Holland, Europe where only the finest top quality oils are produced.
  • Product specification: 100% Fully Synthetic 10W60 - Jaso MA2, API SL
  • Specially developed for use in engines with or without a wet clutch
  • No clutch slippage in hot conditions or plate sticking in cold conditions.
  • Reduces friction, hence lower operating temperatures
  • No oxidation or foam formation
  • Bottle has an easy pour oil funnel
  • We are unable to ship this item outside New Zealand


Q&A About Oil - What Oil Should I Use?  Oil Specifications. Things you may need to know about oil.Are you paying too much for some brands of motorbike oil? What oil should I be using?

Q: What oil should I be using in my engine, gearbox & clutch?

A: Any brand as long as it meets or exceeds the manufacturer’s specifications.

Q: Are you paying too much for some oil brands that offer no more and meet the same specifications?

A: Most people are.

Q: Why are you paying a lot more for some oil brands?

A: You are paying more for some brands because of their high overheads which include advertising costs, sponsorship costs - all to persuade you that their oil is better. Riders/teams are paid a large amount of cash to use certain brand products then next year the same rider gets another sponsor and now guess what? The new product is great. What happened to the old brand?! And so it goes on .... all to make the end user pay more!

Q: Can oil companies or bike manufacturers state the oil they are supplying is better than another’s brand and that it must be used in a particular engine?

A: Next time you hear that line, simply ask "What evidence do you have?" I've never seen any. If you do get any, please let me know! I don't believe that there is any, as oil brands/companies make oil to meet specifications, not for a certain engine or brand, and if another brand’s oils specifications are rated the same  by the API  (American Petroleum Institute) and JASO (Japanese Automotive Standards Organization) then both those oils will do exactly the same job. So one oil company will never say their oil is better than another brand because they cannot prove it. Some people may say one brand is better than another when they meet the same API/JASO specifications but quite frankly they do not know what they are talking about, and do not know how oil is tested.

Q: Why are there so many myths about?

A: Myths are normally created by people trying to sell you a product and to justify why it cost so much.

Q: Pro racers use it so it is the best? Or are we just sheep?

Well if someone else is paying and giving it to you for free wouldn’t you use it? It really doesn’t mean much as most pro mx or sx teams will dump oil after every race and the engines are completely rebuilt after a few races.  So I’m not sure what is being proven here with oil used in pro racer engines.  It doesn’t last? The engine was so stuffed after a few races it had to be rebuilt? What is it saying?  What I think it is saying is that big names use it so you should too!

Q: Why would you be so concerned what brand oil you should use in your bike engine? Do worry to the same degree about the oil in the car you drive on the road? Do you say to the person doing the oil change they must use the most expensive overpriced oil available? Remember your car engine has more moving parts and relies on oil for more protection and longer-life than an off-road bike’s engine.

You most likely use a very expensive overpriced brand oil in your bike’s engine because you have been brain washed into thinking one brand is better than another, because of the advertising, high price or sales pitch when it is no better than other brands which are not so highly priced and just as good, as long as you check the specs.

Q: Will using a different brand oil with the same specifications damage or blow my engine up?

As long as the brand you are using meets or exceeds the manufacturer’s specifications it will not damage the engine. It is illegal to state otherwise. We have heard this can be used to get out of warranty claims which is very dishonest. If someone is saying this get them to put it in writing. Then go see your lawyer.

Q: What oil can I use when my engine in the warranty period?

Any brand as long as it meets the manufacturer’s specifications. If you are told differently you are being misled. 

Does the retail price of an item reflect how good it is?

That is what some people want you to think! So if Motoxparts doubles the price of its oil range it is suddenly better oil? Price is not what makes it better – it is the rating of the oil. All that counts is what is on the oil container label, the specification required & the rating as tested and rated by the API (American Petroleum Institute) and JASO (Japanese Automotive Standards Organization).  Not by a bike manufacturer or someone telling you the oil they are selling is the best.

Note: If the oil you are looking at buying has no API and JASO ratings on it, normally this will be a very low grade oil. Be very careful with this one as you do not know if it is good enough for your engine  - and it most likely will not be.

Q:  Why are Motoxparts’ prices so good?

Motoxparts is the exclusive New Zealand importer of Europe’s BO Motor Oil (Holland) and sells direct to the public, so when you purchase from Motoxparts, you are cutting out the entire middleman/retail level. The middleman/retail normally buys from an importer than sells to you. The middleman/retailer who buys the product off the importer puts as much as 150%-200% mark-up on a product before selling the product to you. So let’s say the retailer buys a 4 litre oil for $60 from the importer than he puts another $60 as mark-up on that product, so you pay $120 retail for the product that started off as $60 from the importer (like Motoxparts). So you are not paying more for the actual oil, you are paying more for it to pass through more hands before reaching you.

If our oil was sold to a retailer and then on to you then the price would likely be double what it is at the moment – ouch!It is very simple - you save when buying from Motoxparts.

Buying direct from Motoxparts (the importer) you save = Motoxparts sells direct to you, only through one set of hands.So no high mark-ups from the middleman/retailer to add onto the price.

Buying from the retailer = The retail buys from the importer, puts a mark-up on that product than sells it to you - This has 2 sets of hands (at least) the product passes through, so more mark-up, more expensive retail cost,  higher cost to the end user which is you